Posted by In setting up the Windows laptop or desktop, the CPU fan error is a typical error message. Mostly this error occurs in gaming desktops like enware aurora 2019. The standard alert occurs after the computer has shut down because of excessive heat. This could happen if fans (or fans) need help to cool the system properly.
While it is annoying, the CPU error message and forced shutdown are signs that the system’s security measures are in place. If the fans aren’t operating correctly and the computer is constantly overheating, the components of the hardware could become permanently damaged.
There are a variety of methods for finding the cause of overheating and the subsequent error messages as to ways of correcting the problem.
How Does the CPU Fan Error Show Up?
On a Windows PC, The issue with the CPU fan typically occurs during the startup or boot-up procedure, but it does not show in regular Windows use. The error message will usually be any of these:
- “CPU Fan Failed!” is the news on the error screen.
- “CPU Fan Error”: What Causes It? What Causes CPU Fan Errors?
Damage caused to the motor, incorrect settings, or other external causes that cause the computer to overheat and cause the fan to operate at extremely high speeds is the main reasons for problems with the CPU fan during startup. In addition, CPU fan problems can cause dust or other particles that block the air vents of the device.
How to Troubleshoot a CPU Fan Error
Since CPU fan issues could be caused by software and hardware problems, Solutions can be as diverse as the issues themselves. They include checking specific settings and your internal CPU’s fan.
To prevent CPU overheating and errors, be sure to follow these tips.
1. Change the computer’s location.
Even if your computer’s cooling system is running at full speed, placing it in a room with high temperatures or direct sunlight could result in it overheating to shut off. Instead, think about moving your computer to a more fantastic area or ensuring that it’s not placed in direct sunlight during daylight hours.
2. Stop the habit of overclocking your PC.
Overclocking can cause a dramatic increase in the system’s heat which is not manageable by fundamental fans. In addition, circuits can be damaged, which can cause frequent shutdowns and issues with overheating.
3. Make sure your PC is at a moderate temperature.
To clear the air vents, take the brush off the vacuum cleaner and run the meeting at maximum power to remove any dirt or dust. You can also blast away the dust using an airgun or bottle of air.
4. Make sure that the CPU’s fans are in good condition.
Shut down your computer, disconnect it from power sources, and then remove the casing to do this.
Utilizing the help of an airgun or canned air, clean the inside and clean it up after the can have been opened.
Note: Avoid spraying any cleaner agent onto any part because this could cause severe harm to many components. Many devices, such as those from the Microsoft Surface line, are not intended to be opened. Opening them could void the warranty or cause irreparable damage.
If you need more clarification, check the support manual available for your device or reach support.
5. Check the fan on your computer.
When your computer is running, You should physically check the fans to ensure they aren’t loose or slipped off the track.
With the help of a screwdriver or adhesive, you’ll be able to anchor your fans back in place according to the kind.
Necessary: Before inspecting anything inside an electrical device, be sure it’s shut down and completely removed from all power sources. When you turn off your computer, select Shut Down instead of sleeping.
6. Check the position of the CPU fan.
If installing the CPU fan on your own, ensure it’s installed at the correct location. In addition, it must have a connection to the CPU header on your motherboard. The fan can operate when the computer is on, even if it’s connected to something other than the motherboard, but it will not be cooling the CPU efficiently.
Tips: The CPU header will probably be identified as “CPU Fan,” but even if it’s not, the three holes that form the fan’s three-pronged plug make it simple to locate.
7. Think about the possibility of using a different CPU fan header.
Consider connecting the fan to an alternative slot if your motherboard has multiple headers for CPU fans. This could solve the CPU fan issue.
8. In BIOS, check the settings for CPU fans.
It is a tool to diagnose technical issues and confirm that everything is operating correctly.
- Choose Advanced Settings, Hardware Monitor, and CPU Fan within the BIOS menu.
- A/C Heat Sink, Active, and Duct with Fan must be activated.
- Passive heat Sink and Fan Duct without fan should be turned off.
- Close the BIOS following the saving of your modifications.
Tips: When you see the initial warning about a CPU fault, You’ll usually be asked to hit F1. When you see this message, press F1 will also open BIOS.
Create a BIOS adjustment to the setting.
If the CPU fan is functioning well and your PC isn’t getting too hot, switching the BIOS option at step 8 can eliminate the CPU fan error notice and bring your computer back to normal.
To do this, open BIOS and choose Monitor > Fan Speed Monitor Ignore Exit > Save changes by selecting the option.
Warning: This may impair the computer’s ability to spot the possibility of future CPU fans or problems with overheating. It is best only to do this when you’re sure your CPU fan is operating correctly, and you can test your laptop’s temperature.
The CPU fan must be replaced.
If none of these strategies work, your fan will likely be damaged and repaired.
Repairing the fan might be covered by the warranty of your computer. However, if you purchased the fan on its own, it could be covered by a separate contract, which you can use to buy a replacement part for a replacement or at a discounted cost.